How to adjust the particle size of disc granulator
Release time:
2024/12/06
The method of adjusting the particle size of the disc pelletizer mainly includes the following aspects.
Adjust the rotational speed: the faster the rotational speed, the smaller the particles. By adjusting the rotational speed of the granulator, the size of the particles can be controlled. If you want to get smaller particles, you can increase the rotational speed appropriately; on the contrary, if you want to get larger particles, you can reduce the rotational speed.
Adjust the angle: the larger the tilt angle, the smaller the granules. The tilting angle of the disk of the disc granulator can be adjusted, and by changing the tilting angle, the size of the granules can also be affected. Adjustment between 35 degrees and 55 degrees can make the size of the pellets made different.
Adjust the humidity of raw materials: the higher the humidity, the larger the pellet. The humidity of the raw material is also an important factor affecting the size of the pellet. In the pelletizing process, the size of the pellets can be controlled by adjusting the humidity of the raw material. If the raw material is too dry, it may be difficult to form particles; while if the raw material is too wet, it may form larger particles. Therefore, the humidity of the raw material needs to be controlled appropriately.
Through the adjustment of the above methods, the size of the granules made by the disc pelletizer can be effectively controlled to meet different production requirements.
Next page
Next page
Relevant Content
Advantages of the HG Circulation Dryer
2024-12-06
ZL Rotary Drum Pelletizer Working Principle
2024-12-06
2024-12-06